Skip to main content
symposium Indentation 2018 from Groupe Indentation Multi-Echelle (GIME)

Full Program

Tuesday, 11 September 2018
13:00-14:00
14:00-15:30
15:30-16:00
16:00-17:00
17:00-18:00
Wednesday, 12 September 2018
8:00-9:30
9:30-10:00
10:00-11:00
11:00-12:00
12:00-13:15
13:15-13:45
13:45-14:15
14:15-15:55
20. In search of the minimal distance between two indentation experimentsJulie Marteau, Université de Technologie de Compiègne, France; Maxence Bigerelle, Hauts-de-France Polytechnic University, France; Pierre-Emmanuel Mazeran, Université de Technologie de Compiègne, France32. Measuring the fracture toughness of solid electrolytes for batteries using micro-pillar indentation splitting testingJuliane Franciele Nonemacher , Forschungszentrum Jülich GmbH , Institute of Energy and Climate Research , Jülich, Germany, Germany; Gang Yan, Forschungszentrum Jülich GmbH , Institute of Energy and Climate Research , Jülich, Germany, Germany; Chih-Long Tsai, Forschungszentrum Jülich GmbH , Institute of Energy and Climate Research , Jülich, Germany, Germany; Sven Uhlenbruck, Forschungszentrum Jülich GmbH , Institute of Energy and Climate Research , Jülich, Germany, Germany; Martin Finsterbusch , Forschungszentrum Jülich GmbH , Institute of Energy and Climate Research , Jülich, Germany, Germany; Jürgen Malzbender , Forschungszentrum Jülich GmbH , Institute of Energy and Climate Research , Jülich, Germany, Germany; Manya Krüger, Forschungszentrum Jülich GmbH , Institute of Energy and Climate Research , Jülich, Germany, Germany49. Determination of elastic moduli of a homogeneous sample from elastic indentation experimentVladimir B. Zelentsov, Don State Technical University, Russia; Boris I. Mitrin, Don State Technical University, Russia; Evgeniy V. Sadyrin, Don State Technical University, Russia; Aleksandr G. Sukiyazov, Don State Technical University, Russia51. Mechanical behaviour of fully densified silica glass and implications on the hardness-to-yield strength ratioVincent Keryvin, Univ. Bretagne Sud, France; Ludovic Charleux, Univ. Savoie, France; Jean-Pierre Guin, Univ. Rennes 1 / CNRS, France; Jean-Christophe Sangleboeuf, Univ. Rennes 1, France52. New methodology for uncertainties evaluation in instrumented indentation testingStephania Kossman, Arts et Métiers ParisTech, MSMP, 8 Boulevard Louis XIV, 59000 Lille, France, France; Thierry Coorevits, Arts et Métiers ParisTech, MSMP, 8 Boulevard Louis XIV, 59000 Lille, France, France; Alain Iost, Arts et Métiers ParisTech, MSMP, 8 Boulevard Louis XIV, 59000 Lille, France, France; Didier Chicot, Université de Lille, Laboratoire de Génie Civil et géo-Environnement, Villeneuve d’Ascq 59650, France, France; Alex Montagne, Arts et Métiers ParisTech, MSMP, 8 Boulevard Louis XIV, 59000 Lille, France, France
15:55-16:00
16:00-16:45
14. INFLUENCE DES DEFORMATIONS PLASTIQUES SUR LES PERFORMANCES ELECTRIQUES DES PHOTODIODES INFRA-ROUGEThierry Broult, SOFRADIR/Institut P', France; Eric Le Bourhis, Institut P', France; Alexandre Kerlain, SOFRADIR, France16. CHARACTERIZATION OF RTM6 EPOXY RESIN MATRIX BY USING HIGH TEMPERATURE NANOINDENTATIONBruno Passilly, ONERA, 29 avenue de la division Leclerc, 92322 Chatillon Cedex, France; Romain Delannoy, ONERA, 29 avenue de la division Leclerc, 92322 Chatillon Cedex, France19. Comportement mécanique des matériaux fragiles durant l'indentation instrumentée cycliqueBentoumi Mohamed, Institut Optique et Mécanique de Précision, LOA, Ferhat Abbas, Sétif 19000, Algeria; Montagne Alex, Arts et Métiers ParisTech, MSMP, ENSAM 8, Boulevard Louis XIV, Lille, France; IOST ALAIN, Arts et Métiers ParisTech, MSMP, ENSAM 8, Boulevard Louis XIV, Lille, France; Chicot Didier, Univ. Lille, FRE 3723-LML-Laboratoire de Mécanique de Lille, Lille, France22. MODELISATION DE L’INDENTATION DE REVÊTEMENTS MULTICOUCHES Ti0,54Al0,46 / Ti0,54Al0,46NDenis Quilliot, Univ. Bourgogne Franche-Comté, Institut FEMTO-ST, CNRS/UFC/ENSMM/UTBM, Département Mécanique Appliquée, F-25000 Besançon, France, France; Sylvain Giljean, Université de Haute Alsace, LPMT EA 4365, 68093 Mulhouse, France, France; Yves Gaillard, Univ. Bourgogne Franche-Comté, Institut FEMTO-ST, CNRS/UFC/ENSMM/UTBM, Département Mécanique Appliquée, F-25000 Besançon, France, France; Marie-José Pac, Université de Haute Alsace, LPMT EA 4365, 68093 Mulhouse, France, France; Fabrice Richard, Univ. Bourgogne Franche-Comté, Institut FEMTO-ST, CNRS/UFC/ENSMM/UTBM, Département Mécanique Appliquée, F-25000 Besançon, France, France23. Caractérisation par micro-indentation instrumentée et micro-tribologie de dépôts de Nickel sur des alliages d’aluminiumSamah krim, Université de F.A Setif 1, Laboratoire des matériaux non métallique, IOMP, Algeria; Sylvain Giljean, Université de Haute Alsace, LPMT EA 4365, 68093 Mulhouse, France; Kamel Loucif, Université de F.A Setif 1, Laboratoire des matériaux non métallique, IOMP, Algeria; Marie-José Pac, Université de Haute Alsace, LPMT EA 4365, 68093 Mulhouse, France25. Mechanical properties of FeAlSi powders prepared by mechanical alloying from different initial feedstock materialsJaroslav Čech, Czech Technical University in Prague, Faculty of Nuclear Sciences and Physical Engineering, Czech Republic; Petr Haušild, Czech Technical University in Prague, Faculty of Nuclear Sciences and Physical Engineering, Czech Republic; Miroslav Karlík, Czech Technical University in Prague, Faculty of Nuclear Sciences and Physical Engineering, Czech Republic; Veronika Kadlecová, Czech Technical University in Prague, Faculty of Nuclear Sciences and Physical Engineering, Czech Republic; Filip Průša, University of Chemistry and Technology Prague, Department of Metals and Corrosion Engineering, Czech Republic; Pavel Novák, University of Chemistry and Technology Prague, Department of Metals and Corrosion Engineering, Czech Republic74. Nanoindentation of biological tissues: opportunities and challenges for the bone-tendon interfaceLisa Leyssens, Université catholique de Louvain, Belgium; Sophie Ryelandt, Université catholique de Louvain, Belgium; Audrey Favache, Université catholique de Louvain, Belgium; Greet Kerckhofs, Université catholique de Louvain, Belgium
16:45-17:15
17:15-18:35
21. Micro compression testing – a promising tool to investigate biopolymers moisture-sensitivityRaphaëlle Kulis, SIMM - ESPCI Paris / Saint-Gobain Recherche, France; Etienne Barthel, SIMM - ESPCI Paris, France; Alessandro Benedetto, Saint-Gobain Recherche, France; Pierre Salomon, Saint-Gobain Recherche, France35. Contributions on instrumented indentation of elastomers : practical case : Influence of thermal aging on local propertiesClémence Fradet, Laboratoire de Mécanique Gabriel LaMé, Université de Tours, France; Florian Lacroix, Laboratoire de Mécanique Gabriel LaMé, Université de Tours, France; Gaëlle Berton, Laboratoire de Mécanique Gabriel LaMé, Université de Tours, France; Stéphane Méo, Laboratoire de Mécanique Gabriel LaMé, Université de Tours, France; Eric Le Bourhis, Institut P’, Université de Poitiers, France42. Study of the Fatigue of an Elastomer by Using Instrumented IndentationFlorian Lacroix, LaMé, France; Clémence Fradet, LaMé, France; Gaelle Berton, LaMé, France; Stéphane Méo, LaMé, France; Eric Le Bourhis, Institut Pprime, France71. Mechanical Properties of Interfaces in 3D Printed Polymer Composites Investigated by NanoindentationLaura Zorzetto, University of Liège, Belgium; Davide Ruffoni, University of Liège, Belgium
18:35-19:00
19:00-20:00
Thursday, 13 September 2018
8:30-9:50
18. Dispersion of mechanical properties at nanoscale studied by indentation mappingUde Dirk Hangen, Bruker NanoGmbH, Germany; Eric Hintsala, Bruker Nano Surfaces, United States; Douglas Stauffer, Bruker nano Surfaces, United States36. Hardness mapping – A tool to evaluate the integrity of heterogeneous weldsSameera Naib, Ghent University, Belgium; Primož Štefane, Maribor University, Slovenia; Wim De Waele, Ghent University, Belgium; Nenad Gubeljak, Maribor University, Slovenia; Stijn Hertelé, Ghent University, Belgium44. Brittleness evaluation and correlation with indentation properties in Carbon Reinforced Polymer CompositesFatiha ELHAOUZI, LCMN, Faculty of Sciences & Techniques -Cadi Ayyad University, Av Abdelkarim el Khattabi Marrakech BP 549, 40 000, Morocco, Morocco; Ahmed Mdarhri, LCMN, Faculty of Sciences & Techniques -Cadi Ayyad University, Av Abdelkarim el Khattabi Marrakech BP 549, 40 000, Morocco, Morocco; Alex Montagne, MSMP, Arts &Métiers Paris-Tech, 8 bv Louis XIV, 59046 Lille, France; ilham EL ABOUDI, LCMN, Faculty of Sciences & Techniques -Cadi Ayyad University, Av Abdelkarim el Khattabi Marrakech BP 549, 40 000, Morocco, Morocco; Alain IOST, MSMP, Arts &Métiers Paris-Tech, 8 bv Louis XIV, 59046 Lille, France58. High-throughput characterization method of non-equiatomic high entropy alloysAntoine Hilhorst, IMAP, Institute of Mechanics, Materials and Civil Engineering, Belgium; Pierre Bille, IMAP, Institute of Mechanics, Materials and Civil Engineering, Belgium; Audrey Favache, IMAP, Institute of Mechanics, Materials and Civil Engineering, Belgium; Pascal Jacques, IMAP, Institute of Mechanics, Materials and Civil Engineering, Belgium
9:50-9:55
9:55-10:40
29. Investigation of the Identifiability of Elastomer Mechanical Properties by Nano-Indentation and Shape-Manifold ApproachOumaima Ezzaamari, Laboratoire de Mécanique Gabriel LaMé - EA 7494, Université de Tours, France; Florian Lacroix, Laboratoire de Mécanique Gabriel LaMé - EA 7494, Université de Tours, France; Stéphane Méo, Laboratoire de Mécanique Gabriel LaMé - EA 7494, Université de Tours, France; Guénhaël Le Quilliec, Laboratoire de Mécanique Gabriel LaMé - EA 7494, Université de Tours, France30. Utilization of spherical indentation to evalute the degradation of thermal barrier coatingsKee Sung Lee, Kookmin University, South Korea; So-dam Choi, Kookmin University, South Korea; Dong Heon Lee, Kookmin University, South Korea; Tae Woo Kim, Kookmin University, South Korea31. Dominant strengthening mechanism of AlSi10Mg processed by Selective Laser MeltingJocelyn Delahaye, University of Liege, Belgium; Anne Marie Habraken, University of Liege, Belgium; Anne Mertens, University of Liege, Belgium33. Characterization of multilayers porous silicon systems by means of nanoindentationAlex Montagne, ENSAM, France; Souheyla Fakiri, URMER/IEMN, Algeria; Khadija Rahmoun, URMER, Algeria; Katir Ziouche, IEMN, France; Alain Iost, ENSAM, France34. Toughness evaluation of a CIGS based solar cellAlex Montagne, ENSAM, France; Hocine Abib, URMER/IEMN, Algeria; Khadidja Rahmoun, URMER, Algeria; Jean-Pierre Vilcot, IEMN, France; Alain Iost, ENSAM, France45. Modeling the indentation properties of carbon black nanoparticles filled thermoplastic compositesZahraa Bouyahia, LCMN, Faculty of Sciences & Techniques -Cadi Ayyad University, Av Abdelkarim El Khattabi, Morocco; ahmed mdarhri, LCMN, Faculty of Sciences & Techniques -Cadi Ayyad University, Av Abdelkarim El Khattabi, Morocco; Alex Montagne, MSMP, Arts &Métiers Paris-Tech, 8 bv Louis XIV, 59046 Lille, France; ilham elaboudi, LCMN, Faculty of Sciences & Techniques -Cadi Ayyad University, Av Abdelkarim El Khattabi, Morocco; Alain IOST, MSMP, Arts &Métiers Paris-Tech, 8 bv Louis XIV, 59046 Lille, France75. In-situ characterization of temperature-induced nano-structural changes of materials by nanoindentationM. Moradi, KLA-Tencor Corporation, Surface Science Group, United States; N.T. Ehmke, KLA-Tencor Corporation, Surface Science Group, United States; W. Ashraf, University of Maine, United States
10:40-11:10
11:10-12:30
17. Segregation network structure investigation on 316L stainless steel processed by Laser CladdingTommaso Maurizi Enrici, University of Liège, Belgium; Jérôme Tchoufang TCHUINDJANG, University of Liège, Belgium; Anne Mertens, University of Liège, Belgium24. Évaluation par indentation instrumentée multicyclique de l’endommagement par fatigue de matériaux métalliquesGeovana Drumond, Laboratoire de Technologie Sous-Marine (LTS), COPPE/UFRJ, Brazil; Francine Roudet, Laboratoire Génie Civil et géo-Environnement (LGCgE), Université de Lille, France; Didier Chicot, Laboratoire Génie Civil et géo-Environnement (LGCgE), Université de Lille, France; Bianca Pinheiro, Laboratoire de Technologie Sous-Marine (LTS), COPPE/UFRJ, Brazil; Ilson Pasqualino, Laboratoire de Technologie Sous-Marine (LTS), COPPE/UFRJ, Brazil26. Crystal plasticity parameter estimation and reverse plasticity of metals in nanoindentationZhuowen Zhao, Michigan State University, United States; Aritra Chakraborty, Michigan State University, United States; Philip Eisenlohr, Michigan State University, United States38. Nano-indentation as a Tool to accurately Characterize and Quantify Martensite in a Ti6Al4V Alloy processed by Laser Metal DepositionHakan Paydas, Metallic Materials Science unit; Aerospace & Mechanical Engineering Dpt. – Université de Liège, Belgium; Tommaso Maurizi Enrici, Metallic Materials Science unit; Aerospace & Mechanical Engineering Dpt. – Université de Liège, Belgium; Anne Marie Habraken, MS²F- MSM unit; ArGEnCo Dpt. – Université de Liège, Belgium; Raoul Carrus, Sirris Research Centre – Liège, Belgium; Anne Mertens, Metallic Materials Science unit; Aerospace & Mechanical Engineering Dpt. – Université de Liège, Belgium; Jérôme Tchoufang Tchuindjang, Metallic Materials Science unit; Aerospace & Mechanical Engineering Dpt. – Université de Liège, Belgium
12:30-13:30
13:30-14:10
14:10-15:50
41. PROPRIETES NANO-MECANIQUES A MULTI-ECHELLE : COMPARAISON ENTRE NANOINDENTATION INSTRUMENTEE ET MICROSCOPIE A FORCE ATOMIQUERosine Coq Germanicus, CRISMAT, France; David Mercier, CRM Group, Belgium; Mickaël Febvre, BRUKER NANO, France; Philippe Descamps, ESIGELEC, France; Philippe Leclère, CIRMAP, Belgium54. Influence of macromolecular orientation and environmental conditions on contact mechanic of semi-crystalline polymeric surfacesJulie PEPIN, CNRS, France; Anne RUBIN, CNRS, France; Thierry ROLAND, CNRS, France; Christian GAUTHIER, CNRS, France65. DEVELOPPEMENT D’UN NANOINDENTEUR IN-SITU PERMETTANT LA MESURE DE PROPRIETES MECANIQUES A TRES HAUTE VITESSE DE DEFORMATIONGaylord Guillonneau, Laboratoire de Tribologie et Dynamique des Systèmes, France; Maxime Mieszala, EMPA, Switzerland; Juri Wehrs, EMPA, Switzerland; Jakob Schwiedrzik, EMPA, Switzerland; Serge Grop, Alemnis, Switzerland; Damian Frey, EMPA, Switzerland; Laëtitia Philippe, EMPA, Switzerland; Jean-Marc Breguet, Alemnis, Switzerland; Johann Michler, EMPA, Switzerland; Jeffrey Wheeler, ETH Zurich, Switzerland69. High frequency indentation on soft polymers: not so elastic after all...Etienne Barthel, Soft Matter Sciences and Engineering, ESPCI Paris, PSL University, Sorbonne Université, CNRS, France; Jean-Paul Salvetat, CNRS-Université de Bordeaux, France; Jean-Pierre Aimé, CNRS-Université de Bordeaux, France70. A NEW IN SITU TECHNIQUE TO EXTRACT RECRYSTALLIZATION KINETICS OF METALLIC MATERIALS BASED ON HIGH TEMPERATURE NANOINDENTATION MEASUREMENTSPaul Baral, Université de Lyon, France; M. Laurent-Brocq, Université Paris Est, France; G. Guillonneau, Université de Lyon, France
15:50-15:55
15:55-16:30
50. Crystal plasticity finite element modeling of plasma-exposed tungsten nano-indentationAleksandr Zinovev, Institute for Nuclear Materials Science, SCK•CEN, 2400 Mol, Belgium; Xiazi Xiao, Department of Mechanics, School of Civil Engineering, Central South University, 410075 Changsha, China; Dmitry Terentyev, Institute for Nuclear Materials Science, SCK•CEN, 2400 Mol, Belgium; Laurent Delannay, iMMC, Université catholique de Louvain, Av. Georges Lemaître 4, 1348 Louvain-la-Neuve, Belgium53. Mechanical and tribo-electrochemical behavior of hybrid sol-gel coatingsStephania Kossman, Arts et Métiers ParisTech, MSMP, 8 Boulevard Louis XIV, 59000 Lille, France, France; Alberto Mejias, Arts et Métiers ParisTech, MSMP, 8 Boulevard Louis XIV, 59000 Lille, France, France; Mariana Staia, Universidad Central de Venezuela, 1053 Caracas-Venezuela/Arts et Métiers ParisTech, MSMP, 8 Boulevard Louis XIV, 59000 Lille, France, France; Adrien Van Gorp , Arts et Métiers ParisTech, MSMP, 8 Boulevard Louis XIV, 59000 Lille, France, France; Thierry Coorevits, Arts et Métiers ParisTech, MSMP, 8 Boulevard Louis XIV, 59000 Lille, France, France; Alex Montagne, Arts et Métiers ParisTech, MSMP, 8 Boulevard Louis XIV, 59000 Lille, France, France; Alain Iost, Arts et Métiers ParisTech, MSMP, 8 Boulevard Louis XIV, 59000 Lille, France, France; R. Ooi, Université de Mons, Belgium; M. Poorteman, Université de Mons, Belgium; M. Olivier, Université de Mons, Belgium55. Assessment of the effect of diffusible hydrogen on the mechanical properties of 3rd generation advanced high strength steels owing to nanoindentationOlivier Hubert, UCLouvain, Belgium; David Mercier, CRM Group, Belgium; Cédric Georges, CRM Group, Belgium; Pascal Jacques, UCLouvain, Belgium56. ETUDE PRELIMINAIRE SUR l’EXTRACTION DES CONSTANTES D’ELASTICITE DE FIBRES ANISOTROPES ET HETEROGENES PAR NANOINDENTATION INSTRUMENTEEMonia Grabow, Univ. Bretagne Sud, France; Vincent Keryvin, Univ. Bretagne Sud, France; Ludovic Charleux, Univ. Savoie Mont Blanc, France; Mariette Nivard, Univ. Rennes 1 / CNRS, France61. Micro-hardness evolution in Friction Stir Processed 7475 aluminium plateMatthieu Lezaack, IMAP, iMMC, Université catholique de Louvain, Place Sainte-Barbe 2, B1348, Louvain-la-Neuve, Belgium; Aude Simar, IMAP, iMMC, Université catholique de Louvain, Place Sainte-Barbe 2, B1348, Louvain-la-Neuve, Belgium76. Characterization and modeling of heterogeneous materials under multiaxial solicitationsAmine BOUSSELHAM, Univ. Lille, LaMcube Laboratoire de Mécanique Multiphysique et Multiéchelle, France; P. DUFRENOY, Univ. Lille, LaMcube Laboratoire de Mécanique Multiphysique et Multiéchelle, France; F. ROUDET, Univ. Lille, LGCgE Laboratoire de Génie Civil et géo-Environnement, France; V. MAGNIER, Univ. Lille, LaMcube Laboratoire de Mécanique Multiphysique et Multiéchelle, France; A-L. CRISTOL, Univ. Lille, LaMcube Laboratoire de Mécanique Multiphysique et Multiéchelle, France
16:30-17:50
15. Description of Berkovich nanoindentation experiment on ZrN coatings on Cu, Si and steel substrates using analytical modelEvgeniy Sadyrin, Research and Education Center “Materials”, Don State Technical University, Russia; Andrey Vasiliev, Research and Education Center “Materials”, Don State Technical University, Russia; Boris Mitrin, Research and Education Center “Materials”, Don State Technical University, Russia; Andrey Nikolaev, Vorovich Mechanics and Applied Mathematics Research Institute, Southern Federal University, Russia; Sergey Aizikovich, Research and Education Center “Materials”, Don State Technical University, Russia40. Quantitative mapping of nanoscale mechanical properties of Zn-Al coating on steel by nanoindentationDebora Rosseel, ArcelorMittal Global R&D Gent, OCAS N.V., Zelzate, Belgium; David Mercier, CRM group Liege, Belgium; Mélanie Gauvin, ArcelorMittal Global R&D Gent, OCAS N.V., Zelzate, Belgium; Franck Nozahic, ArcelorMittal Global R&D Gent, OCAS N.V., Zelzate, Belgium; Krista Van den Bergh, ArcelorMittal Global R&D Gent, OCAS N.V., Zelzate, Belgium37. Microstructural and Micromechanical Characterization of a HSS alloy processed by Laser Metal Deposition: Comparison of the Matrix within the Melt Pool and the Heat Affected ZoneJérôme Tchoufang Tchuindjang, 1Metallic Materials Science unit; Aerospace & Mechanical Engineering Dpt. – Université de Liège, Belgium; Olivier Dedry, 1Metallic Materials Science unit; Aerospace & Mechanical Engineering Dpt. – Université de Liège, Belgium; Neda Hashemi, 1Metallic Materials Science unit; Aerospace & Mechanical Engineering Dpt. – Université de Liège, Belgium; Raoul Carrus, Sirris Research Centre - Liège, Belgium; Cyril Cayron, Laboratory of ThermoMechanical Metallurgy; PX Group Chair – EPFL, Neuchâtel, Switzerland; Anne Mertens, 1Metallic Materials Science unit; Aerospace & Mechanical Engineering Dpt. – Université de Liège, Belgium64. Mechanical properties and decohesion of sol-gel coatings on metallic and glass substratesArnaud Nicolay, University of Mons, Faculty of Engineering, Belgium; David Mercier, CRM Group, Belgium; Abdelhamid Boudiba, Materia Nova, Belgium; Xavier Vanden Eynde, CRM Group, Belgium; Laure Libralesso, CRM Group, Belgium; Alain Daniel, CRM Group, Belgium; Marjorie Olivier, University of Mons, Faculty of Engineering, Belgium
19:30-22:30
(Société Littéraire de Liège)
Friday, 14 September 2018
9:00-10:20
13. Residual stress field induced by spherical indentation in a copper single crystalSimon Breumier, Ecole des Mines de Saint-Etienne, France; Aurelien Villani, Ecole des Mines de Saint-Etienne, France; Claire Maurice, Ecole des Mines de Saint-Etienne, France; Martin Lévesque, Ecole Polytechnique de Montréal, Canada; Guillaume Kermouche, Ecole des Mines de Saint-Etienne, France39. Numerical Study of Shape-Manifold Learning Approach Applied to Material Property Identification from Instrumented IndentationsGuenhael Le Quilliec, Laboratoire de Mécanique Gabriel Lamé - EA 7494, France; Liang Meng, Laboratory of Engineering Simulation & Aerospace Computing - ESAC, China; Piotr Breitkopf, CNRS Laboratoire Roberval UMR7337, France43. Strategies and methods for the mechanical characterization of metallic materials by nanoindentationMOISES SANCHEZ, ISAE-SUPAERO, France; ANIS HOR, ISAE-SUPAERO, France; MABRU CATHERINE, ISAE-SUPAERO, France; MARTIN THIERRY, ISAE-SUPAERO, France
10:00-10:05
10:05-11:00
48. In-situ evaluation of mechanical properties for steels and their accuracy based on Vickers Hardness and Automated Ball Indentation on PenstocksCharlotte BAILLON, EDF, France; Marion PARISE, EDF, France; Philippe BRYLA, EDF, France62. Characterization of carbon fiber – epoxy interfaces by means of single fiber push-out testsJérémy Chevalier, UCLouvain/iMMC, Belgium; Rodrigo Tavares, Universidade do Porto, Portugal; Yann-Alex Janssens, UCLouvain/iMMC, Belgium; Pedro Camanho, Universidade do Porto, Portugal; Frédéric Lani, Any-Shape s.a., Belgium; Thomas Pardoen, UCLouvain/iMMC, Belgium66. Mechanical behavior of electroless nickel coatingsAlex Montagne, ENSAM, France; Luiza Bonin, Université de Mons, Belgium; Muhammad Zeeshan Mughal , Roma Tre University, Italy; Marco Sebastiani, Roma Tre University, Italy; Edoardo Bemporad, Roma Tre University, Italy; Véronique Vitry, Université de Mons, Belgium; Alain Iost, ENSAM, France; Mariana Staia, ENSAM, France72. Study of mechanical response of viscous materials using the nanoindentation techniqueNacer Tala Ighil, Research Center in Industrial Technologies (CRTI), Algeria; Ahcene Mokhtari, Research Center in Industrial Technologies (CRTI), Algeria77. Initiation of deformation in lamellar γ-TiAlThomas Edwards, University of Cambridge/EMPA, United Kingdom; F. Di Gioacchino, University of Cambridge, United Kingdom; A. J. Goodfellow, University of Cambridge, United Kingdom; G. Mohanty, EMPA, Switzerland; J. Wehrs, EMPA, Switzerland; J. Michler, EMPA, Switzerland; W. J. Clegg, University of Cambridge, United Kingdom
11:00-11:30
11:30-12:30
57. Mechanical characterization by nanoindentation of Invar 36 made by selective laser meltingNorberto Jimenez Mena, CRM group, Belgium; Nicolas Nutal, CRM group, Belgium; David Mercier, CRM group, Belgium27. REVETEMENTS PIEZOCHROMES POUR LA DETECTION D’IMPACTS SUR SUBSTRATS COMPOSITESEric Le Bourhis, Institut P', France63. Mechanical characterization of electrodeposited metallic and cermet coatingsJean-François Vanhumbeeck, CRM Group, Belgium; David Mercier, CRM Group, Belgium
12:30-13:30
13:30-14:30
14:30-16:00

 


Powered by OpenConf®
Copyright ©2002-2017 Zakon Group LLC